Angel Chemicals Private Limited

Fluoride Test Kit occurs naturally in all types of water. Typically, surface waters and sea waters have low concentration of fluoride while groundwater may contain high levels of fluoride as it may be exposed to many inorganic fluoride-containing minerals. Fluoride salts are also frequently encountered in many industrial applications. Fluoride is important in drinking water as excessive fluoride cause mottling. A permissible limit has been laid down for fluoride therefore analysis of fluoride is mandatory in drinking water. Our fluoride water test is one of its kinds and works on the titrimetric principle. The end point is a clear yellow.

A Total Hardness Test Kit is used to measure the concentration of calcium (Ca²⁺) and magnesium (Mg²⁺) ions in water, which contribute to water hardness. Water hardness affects boiler scaling, soap efficiency, industrial processes, and drinking water quality.

A Field Testing Kit is a portable solution used for on-site water analysis to quickly assess various water quality parameters. These kits are widely used in drinking water testing, wastewater treatment, industrial applications, and environmental monitoring.

The Aquasol Dissolved Oxygen (DO) Test Kit is designed to measure the amount of oxygen dissolved in water, which is crucial for aquatic life, industrial processes, and water treatment applications. Low dissolved oxygen levels can indicate pollution, wastewater contamination, or poor water aeration, affecting fish, aquatic organisms, and water quality.

A Bacteria Test Kit is used to detect and measure harmful bacteria in water sources, ensuring water safety for drinking, industrial, agricultural, and environmental applications. These kits help identify bacterial contamination that can cause diseases such as cholera, typhoid, dysentery, and gastrointestinal infections.

Bactaslyde is a presterilized plastic paddle coated with specially developed proprietary media on each side for the growth of a variety of bacteria, yeasts fungi. Bactaslyde are supplied in boxes of 5 along with the complete instructions set a density chart to have a complete quantitative analysis of bacteria.

An Arsenic Test Kit is used to detect and measure arsenic (As) levels in water, ensuring compliance with drinking water safety standards. Arsenic contamination is a major concern, especially in groundwater sources, and prolonged exposure can cause serious health issues such as cancer, skin lesions, and organ damage.

The acidity of water is the capacity of water to neutralize base to desired ph. Acidity Test Kit is caused by weak organic acids and strong mineral acids. It indicates corrosion of water. This AQUASOL water test is a titration test and is extremely easy and convenient and gives accurate results.

A Nitrate Testing Kit is used to measure nitrate (NO₃⁻) levels in water, ensuring water safety for drinking, agriculture, aquaculture, and industrial applications. High nitrate levels can cause health risks, such as methemoglobinemia (blue baby syndrome) in infants and algal blooms in water bodies.